[ROOT] How to Root Walton Primo G1 Jelly Bean 4.1.1 (MT6577)

First Download the Attachment file and save it to some place safe ...

Transfer the Jelly_bean_root_6577.zip file to your device sdcard .......

Open your version of SP Flash Tools ( the one that you have used to upgrade to JB ) ..

Load the MTK scatter file from attachment and then trick recovery and browse the downloaded file ( recovery-cwm -jb.img ) ... then hit download and turn off your primo g1 pull out the battery and reinsert it , then connect it with mini usb cable ( with or without battery )..... and you will see these pic below ...

Quote:

You can also use my previous CWM from Walton Android Shop thread here .... But this one has just compiled besed on the stock jelly bean 4.1.1 recovery ...

then it will start to flash CWM to your primo g1 ..



if everything goes alright then you will get this pic below ..



CWM has just being flashed to your primo ... Go to recovery mode by Power + Vol up Button ( let go when you will see the walton logo .. )

In CWM go to Install zip from sdcard > choose zip from sd > choose the Jelly_bean_root_6577.zip file and > apply yes ... then resart your device ..

Congratulation ... your Primo G1 Jelly Bean 4.1.1 has been rooted ...

Attached Files

	Jelly_bean_root_6577.zip - [Click for QR Code](2.18 MB, 1467 views)
	recovery-cwm -jb.img - [Click for QR Code](4.54 MB, 1199 views)
	MT6577_Android_scatter_emmc.txt - [Click for QR Code]