iPhone 4s Schematic diagram free download

iPhone 4s Schematic diagram free download

iPhone 4s Schematic diagram free download

iphone 4s schematic circuit diagram free download

iphone 4s battery connector schematic

iphone 4s battery connector schematic

how to replace battery connector on iphone 4s

how to replace battery connector on iphone 4s

Free Download Link

Free Download Link

-->

Iphone charge no response solution tested 100%

iPhone Check Warranty Unlock

iPhone iPad Check Warranty unlock function allows to check which network is the iPhone and check simlock status. This information is needed to order unlock service. Checking is done on the basis of the IMEI number. Information comes directly from Apple base.

After entering and checking the IMEI number, click Check Warranty Unlock (below the phone's data). A moment later we get the following data:

• The network on Which the phone is locked
• Serial number
• Color / capacity
• The warranty period
• The current version of the software

-->

How to Downgrade Your iPhone 4 From iOS 6.x to iOS 5.x (Windows)

Step One
Create a folder on your desktop called Pwnage

Download the latest version of RedSn0w from here and place it in the Pwnage folder. Likewise, download the firmware you would like to restore to and the firmware you are current on from here and place it/them in the Pwnage folder. 

Extract the RedSn0w zip file to the Pwnage folder.

Step Two
Right click or control-click the redsn0w application from the redsn0w folder we extracted earlier and choose Run as administrator from the popup menu that appears.




Step Three
Click Extras from the main menu.


Step Four
Click Even More from the Extras menu.

How to replace your iPhone 4 battery.

Step 1.

Open back side of iPhone 4.check the images for open back side.

1) Your iPhone 4 rear cover may have either two #000 Phillips screws or Apple's 5-Point "Pentalobe" screws . Check which screws you have, and ensure you also have the correct screw driver in order to remove them.

2)Remove the two 3.6 mm Pentalobe or Phillips #000 screws next to the dock connector.

 

Step 2.

Push the back side upward for remove the back cover.check this image for removing.

/Mobilessolutions.com.Apple_iPhone_4_32_battery+change+1.jpeg" style="border-bottom-style: none; border-bottom-width: 0px; border-color: initial; border-left-style: none; border-left-width: 0px; border-right-style: none; border-right-width: 0px; border-top-style: none; border-top-width: 0px; border-width: initial; list-style-image: initial; list-style-position: initial; list-style-type: none; margin-bottom: 0px; margin-left: 0px; margin-right: 0px; margin-top: 0px; max-width: 99%; outline-color: initial; outline-style: none; outline-width: initial; padding-bottom: 0px; padding-left: 0px; padding-right: 0px; padding-top: 0px; vertical-align: baseline;" width="400" />

 Step 3.

  Remove back side from your Iphone.

Step 4.

Remove the screw on the battery connector be careful some iPhone devices have 2 screw on the battery connector.

 

 

 

Step 5.
Use the Plastic stick for unlock jack lock.

Final Step 6.

Finally remove the battery strip from the jack follow these images.
Before reconnecting the battery connector, be sure the pressure contact (shown in red) is properly positioned next to the battery connector.
Before reassembly, be sure to clean all metal-to-metal contact points on the pressure contact as well as its contact point on the rear panel with a de-greaser such as windex (96% ethanol alcohol works well too, but make sure that contacts are dry when done). The oils on your fingers have the potential to cause wireless interference issues.