Samsung Galaxy Note N7000 Flashing Tutorial

Samsung Galaxy Note N7000 Flashing Tutorial

Samsung  N7000 Flashing Tutorial

Preparations :

1. Backup all of data on device storage
2. Makesure the battery is fully charged

Tools & Materials :

1. Odin3 v1.85 Downloader | 4shared | mediafire | megaupload |
2. Samsung Galaxy Note N7000 Firmware
3. Usb data cable
4. PC

Step by steps :

** Open Odin3 v1.85 software

** Check Re-Partition, Auto Reboot, and F. Reset Time options. 

** Check and select .pit file ( looks like Q1_20110914_16GB.pit ) 

** Check and select PDA file ( Looks like CODE_N7000xxxxx_CL627135_REV02_user_low_ship.tar.md5 ) 

** Check and select Phone file ( Looks like MODEM_N7000xxxxx_REV_05_CL1067428.tar.md5 ) 

** Check and select CSC file ( looks like GT-N7000-MULTI-CSC-Oxxxxx.tar.md5 ) 

** Enter the phone into download mode by pressing Volume down + Home + Power on Button, then press Volume Up. 

** Connect phone to usb cable, wait and makesure phone detected ( [id : com] box highlighted in yellow ) 

** Click " START " Button 

** Wait until all process done ( green colored " PASS! "sign will appear on the upper-left box ) 

** Disconnect phone from usb data cable 

** Do the reset by pressing *2767*3855# from dial pad. 

** All Done..!!!

Android 4.1.2 Jelly Bean Firmware For Samsung Galaxy Note GT-N7000 Leaked With New Fe

Android 4.1.2 Jelly Bean Firmware For Samsung Galaxy Note GT-N7000 Leaked With New Features: How To Install [Tutorial]


Here is good news for those owners of the Samsung Galaxy Note GT-N7000 who have been waiting for the latest Android 4.1.2 Jelly Bean update. A test firmware, N7000BLS4TCE, based on Android 4.1.2 Jelly Bean for the Samsung Galaxy Note, got leaked Thursday.

Sammobile reported that the leaked Android 4.1.2 Jelly Bean test firmware, provided by “Tel Cel from Mexico,” was just like any other official firmware. All what the users are required to do is to flash the firmware with Odin. There’s no need to flash any fixes after that.


“We have FULLY TESTED this firmware and this firmware works to our knowledge perfectly as any other official firmware the only thing is, it has different icons and widgets which are from the provider (alot of Bloatware),” read a post over at Sammobile.


The post also stated that N7000BLS4TCE, the leaked Android 4.1.2 Jelly Bean firmware in question, is the same as the N7000XXLSA Firmware and lacks the S-Pen features.


Below are some of the key enhancements and features in the new Jelly Bean update:

- Android 4.1.2 – Build JZO54K

- Buttery Smooth Performance & Great Stability (Thanks to Project Butter)

- Multi-View (Multi Windows Multitasking, same as in Note II)

- Multi-View can also be disabled

- Ripple Effect on Lock Screen

- Page Buddy

- Notification Panel can now be customized

- New Additions in Notification Panel

- Smart Rotation (Screen Display adjusts to your angle of sightings)

- Continues Input in Samsung Keyboard (Like Swipe or Android 4.2 Keyboard)

- Samsung’s Cloud services

- Direct Call, Smart Stay and Pop-up Play Features

- New Widgets From the Galaxy S3

- 2 Home screen modes

- New Notifications bar

- Google Now


Firmware Details

Android Version: 4.1.2 – JZO54K (Jelly Bean)

PDA: N7000UBLS4

CSC: N7000UBLS1

MODEM: N7000TCELS1

Build Date: Nov. 30, 2012

Region: South America

Country: Mexico

Download: N7000UBLS4_N7000TCELS1_TCE.zip

Quote:

Below is the tutorial for flashing the leaked Jelly Bean Firmware on the Galaxy Note. But before that, keep in mind the following aspects: - This is a PRE-RELEASE version and not official from KIES. Hence, expect some minor bugs. - The users must note that IBTimes will not be held responsible for anything that goes wrong. They should proceed at their own risk.

Step 1: Unzip the file

Step 2: Open Odin 3.04 (Download)

Step 3: Restart phone in download mode (Home + power + vol down)

Step 4: Connect phone and wait until you get a yellow sign in Odin

Step 5: Add CODE_N7000UBLS4_619662_REV02_user_low_ship.tar.md5 to PDA

Step 6: MODEM_N7000UBLS1_REV_05_CL1228938.tar.md5 to PHONE

Step 7: Add CSC_TCE_N7000TCELS1_619662_REV02_user_low_ship.tar .md5 to CSC

(No need to use the Pit file)

Step 8: Ensure that re-partition NOT ticked

Step 9: Start flash, sit back and wait a few minutes.

Galaxy Notes N7000 Repair Imei OK

Quote:

Welcome to Octopus Box Samsung software version 1.2.8
-----------------------------------------------------------------------------------
To connect GT-N7000 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "PDA" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in Octopus Samsung software.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM1
Selected model: GT-N7000
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM169
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM169
Selected model: GT-I5500
Detected phone model:
HW Version: XXXXXXXXXXXXXX
Phone model is not supported
Mode: Normal
Phone model:
Phone model is not supported
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM169
Detected phone model: GT-N7000
HW Version: XXXXXXXXXXXXXX
Phone IMEI: 004999-01-064000-0
Firmware compiled date: Tue Dec 20 20:22:15 KST 2011
Android version: 2.3.6 (GINGERBREAD)
Phone IMEI: 004999010640000
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM169
Selected model: GT-N7000
Detected phone model: GT-N7000
HW Version: XXXXXXXXXXXXXX
Phone IMEI: 004999-01-064000-0
Firmware compiled date: Tue Dec 20 20:22:15 KST 2011
Android version: 2.3.6 (GINGERBREAD)
Phone IMEI: 004999010640000
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM169
Selected model: GT-N7000
Detected phone model: GT-N7000
HW Version: XXXXXXXXXXXXXX
Firmware compiled date: Tue Dec 20 20:22:15 KST 2011
Android version: 2.3.6 (GINGERBREAD)
Phone IMEI: 004999010640000
Old IMEI: 004999-01-064000-0
New IMEI: 359616-04-863474-5
Writing new IMEI. Please wait...
New IMEI successfully writed.
Please, restart phone to apply changes
Link