Nokia 101 flashing ok but set is dead 100% working solution

states of the phone is dead ...

flashing with atf ,

flashing is ok but one error is show (lcd test failed )





VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done

Booting Phone...
CPU ID Response: A200341100
CPU Type: XG110 2.1B
Phone Booted at after First attempt...

************************************************** ****
TIME STARTS HERE
************************************************** ****


Sending PBL 19456 bytes...
PBL Successfully Sent...

Sending SBL 65024 bytes...
SBL Successfully Sent...

Flash Chip Manufacturer: STMicroelectronics
Flash Chip Type: M58WR064 64 Mbit (4Mb x 16) NOR
Extended Information: Multiple Bank / Burst / 1.8v

Processing Image File: C:\Program Files\Nokia\Phoenix\Products\RM-769\rm769_007.200

FIRMWARE Image Found...
Number of Sections: 03
FIRMWARE Certificate Block Sent Successfully...
Processing Section 01 of 03
FIRMWARE Erase Block: 0x00000000~0x0001FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 24576 bytes
Data Checksum: F5BE
Uploading Data Blocks to phone...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 02 of 03
FIRMWARE Erase Block: 0x00800000~0x00BFFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 4128768 bytes
Data Checksum: BFB7
Uploading Data Blocks to phone...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 03 of 03
FIRMWARE Erase Block: 0x00C5D000~0x00E5FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 1697536 bytes
Data Checksum: 2B05
Uploading Data Blocks to phone...
FIRMWARE Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Processing Image File: C:\Program Files\Nokia\Phoenix\Products\RM-769\rm769_007.20mh

PPM Image Found...
Number of Sections: 01
PPM Certificate Block Sent Successfully...
Processing Section 01 of 01
PPM Erase Block: 0x00100000~0x0061813E
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 5341504 bytes
Data Checksum: 47D8
Uploading Data Blocks to phone...
PPM Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Processing Image File: C:\Program Files\Nokia\Phoenix\Products\RM-769\rm7690_nai07.20mh_nlt

CONTENT Image Found...
Number of Sections: 01
CONTENT Certificate Block Sent Successfully...
Processing Section 01 of 01
CONTENT Erase Block: 0x00E60000~0x00F49FFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 958464 bytes
Data Checksum: BB37
Uploading Data Blocks to phone...
CONTENT Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Exit Flash Mode Done...
Time Elapse : 00:04:32

************************************************** ****
You must Factory Reset the phone to enable the
ringtones and other customized settings to work
************************************************** ****


Waiting For Phone to go Online...

5, 4, 3, 2, 1...
MCU: V 07.20 30-03-12 RM-769 (c) Nokia
IMEI: 353654055460122
Product Serial Number: 3D65DAFBI
Product Code : 059J2D0
Module Code : 0204874
Basic Production Code: 059P5G1
PPM SW Version : V 07.20 30-03-12 RM-769 (c) Nokia MH
ADSP Version : p+V 07.20\n30-03-12\nRM-769\n(c) NMP\nmh_nlt
MCU SW Version : V 07.20 30-03-12 RM-769 (c) Nokia
HW Version : 3000
UEM Version : 1328
UPP Version : 8850
LCD Version : UNKWN: IDs: 00:00:00
********** SIMLOCK INFO **********
CONFIG_DATA : 0010100000000000
PROFILE_BITS : 0000000000040002
ASIC : 11
PROVIDER : Default Test Operator

Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST : FAILED

Phone Cannot Enter Normal Mode if LCD
is Damaged or LCD is not Properly
Connected to the Main PCB


FACTORY SET TO : Full Factory Set
OK
FACTORY SET TO : User Data
OK
FACTORY SET TO : Leave Factory
OK
FACTORY SET TO : Service Center
OK
FACTORY SET TO : Software Upgrade
OK
FACTORY SET TO : Production Tune
OK

apply this jumber.. 100% working.....








phone is on condeshion.....

Nokia 101 RH-131 V 4.30 latest flash files

Nokia 101 RH-131 Version 4.30 latest flash files Free direct download only 3 files MCU,PPM,CNT just click on file for direct download


Latest Version 4.30
1) MCU
2) PPM
3) CNT
Version 4.10
1) MCU
2) PPM
3) CNT

Nokia 101 RM-769 latest flash files free download

Nokia 101 RM-769 latest flash files Free direct download only 3 files mcu,ppm,cnt  just click on file for direct download. 
 
Latest Version 7.70 Urdu Flash files
1) MCU
2) PPM
3) CNT

7.20 Urdu Flash files
1) MCU
2) PPM
3) CNT

Download Nokia 101 Rm 769 Flash File Direct Link Free

 
 Download Nokia 101 Flash File Direct Link Free
100% working
Latest Update
Simple Ads Free
Including New Option
1 Click Download
Download
Link
  Click For Download

Nokia 101 White Display Solution

Nokia 101 light solution 10000000% tested

Nokia 101 White Display 100% Tested Solution

Nokia 101 White Display Problem Repairing Solutions are available in the following article. Also you will find Nokia 101 Display Ways and Jumpers information in the diagrams further in this post.
Nokia 101 White Display Problem
Nokia 101 White Display Solution
Nokia 101 Blank Display
Please Note that we will edit these solutions or add new ones if found in this page at any time in the future. So feel free to come back any time on this page to stay up to date.

Here Are Nokia 101 White Display Problem Solution. Please Observe Carefully.

NOKIA 101 LIGHT JUMPER 1000% tested BY Me

Nokia 101 converted lcd with complete guide

NOKIA 101 DUAL SIM



PROBLEM:
-CHANGE LCD(i have no available lcd for n101 so i use the lcd for n1616)

PROCEDURE:FOLLOW THE SCREENSHOTS

BECAUSE THE N1616 LCD IS MUCH LONGER THAN N101-







NOW LET US PROCEED TO THE LCD LIGHT CIRCUIT CONVERTION
BECAUSE YOU WILL HAVE A DIMMER DISPLAY IF YOU DONT...




























ASSEMBLE THE UNIT....





CONVERTION DONE!..

Nokia 101 LCD Solution update

Nokia 101 net working solution -1

Nokia 101 all solution

mic solution

Nokia 101 ringer and speaker solution

NOKIA 101 MMC PROBLEM REPAIR

NOKIA 101 DEAD

fake charging solution

NOKIA 101 LCD LINE

 

NOKIA 101 SIM PROBLEM

Nokia 101 net working solution -1