Showing posts with label HOW TO. Show all posts

How To Update Xperia X10 mini firmware with PC companion software

Force a restart of the phone if the phone hangs and can't be restarted normally.
Update your phone. Even if you have the latest software, updating your phone can improve
software stability and solve other problems.

Resetting the phone
Resetting the phone deletes all data, including downloaded applications, and resets the
phone back to its initial state, the state before you turned on the phone for the first time.
Make sure to back up important data you have on the phone before you reset the phone.
To reset the phone
1 From the Home screen, drag upwards.
2 Find and tap Settings > SD card, USB Mass Storage & phone storage > Factory
data reset > Reset phone.
3 Enter your screen unlock pattern.
4 Tap Erase everything.

There is also a RESET button on the back side of the device (under the IMEI sticker in the lower left corner) under the battery cover

Download PC companion and install

Download Link

PC Suite is out of date use PC companion software instead

If nothing works: As last resort do a Sony Ericsson txt phone repaire with PC Suite. Use this method to hard reset AFTER INSTALLATION----> TOOLS > PHONE REPAIR

Android China Phones (MT65xx) IMEI Invalid Solution

Many User's Facing This Problem But You can Easily Change Your Imei Without Any Boxes Or Cable.

First Install (Term.apk) This Application In Your Device .

DOWNLOAD Term.apk

Now Run It & Type This Command By Your Hand.

echo AT+EGMR=1*7*IMEI_1 >/dev/pttycmd1

echo AT+EGMR=1*10*IMEI_2 >/dev/pttycmd1

How To Find Rx Tx Signels

Find Rx .tx Signles easyyy

HOW TO FIND RX .TX SIGNLES .

It is tasted and also you can test it.

1 step is* we need to find GND from phone.

2 step is* we should power on phone (operation with dead phone:

phone must be 100% dead by software)and take multimater put it to voltage.

3 multimeter (-) line put it GND and with (+) line check each connectors

* and usually Tx= 1.8v or 2.8v and Rx=1.7v or 2.7v

(it will be change by processor but strongly 1.7v or 2.8v not 3v or 4v)

This way is too easy and you will save a more time.

For example!

You have got new brand China miracle phone with USB cable. It has got

12 pin. You must find (Infinity team give good Idea 1.2.3 punkts):

1) GND usually it has got 2 GND. (now we have got 10 pins)

2) We will uncheck USB + and USB- (VSS) just with checking by USB cable (now we have 8 pins)

3) By USB cable we also uncheck V bat+* ac adaptor + polarization (now we have 7 pins)

4) Now from this 7 pins you will find 1 or 3 not used pins (last operation we have 3 or 6 pins to find Rx Tx signals)

5) Now at last operation you should use good multimeter just to find Rx Tx with 1.7v-2.7v or 1.8v-2.8v

6) WHEN PHONE IS POWERD OFF TX AND GND WITH MULTIMETER MAKING BEEEEEP

(DIOD TEST OPERATION)* WHEN PHONE POWERED ON IT WILL SHOW LIKE DIOD

RESISTANS 600-700 OHM BETWIN TX AND GND.

I think I have give for every body more information’s. Just try to

find. If you find 2-3 phone signals and you will be profi mobile Tx and

Rx signals finder.

How to Hard Reset Samsung Galaxy Ace S5830

1. Press and hold the power and menu key for few second untill you enter the restore menu
2. After the menu show choose “wipe data/factory reset “
3a. Select yes and your phone will be restore to default
3b. After finish choose reboot now
4. It will restart. Don’t panic because it take few minute until complete.
5. Don’t panic just wait. If there is no response in 10 minute just release your battery and put it back again and repeat from first step.
Note;
-use menu key to select.
-use volume up down to choose the menu.
-make sure u have enough power in ur batttery.
Other Method
1. go to setting~>privacy~> factory data reset.

OR

2. dial *2767*3855#

all of this method will make the same effect to your phone: -”reset your phone to factory setting”

How To:Hard Reset the Dell Streak to Factory Default Settings

The following steps will restore your device to the default state and erase all data and downloaded applications stored on it. Ensure that you back up all required data before you reset the device.

First, try this:

1. From the main home screen, tap menu
2. Select Settings, then Privacy
3. Select Factory data reset
4. Select Reset device
5. Select Erase everything

If your device is frozen and the above doesn't work try this,
1. Press and hold the Power button and then touch the Power off option on the screen to turn off the device.

2. Simultaneously press and hold the volume up button and volume down button.

3. Without releasing the volume buttons, press and hold the power button until the device displays the configuration screen.

4. Press the volume buttons to move the highlight bar on the screen to the Factory Reset option.

5. Touch the Camera button to start the reset process.

6. Wait for the device to reboot.

All of your data stored from the Dell Streak including third-party applications will be deleted . Once the software reset is complete, the phone will then reboot to its factory fresh default state settings.

How to Master Reset Motorola Spice XT300, Hard Reset Motorola Spice XT300

To perform a Master Reset on your Motorola Spice XT300 reset follow the steps below:

with the phone off, press the power button and the "X" key on the keyboard
When the triangle appears press the "alt" and the "w" key on the keyboard
let the Motorola Spice XT300 reboot and your done!

HOW TO FIX YOUTUBE VIDEO STOPS STREAMING WHEN SCREEN LOCKED On GOOGLE NEXUS 7:

Once upgrading your Nexus 7 to Android 4.1.2, you may have some issues with the YouTube app, one of which is the video stops streaming when the screen is locked.

Usually, if you have a good network, then you wouldn't have a problem watching YouTube videos. But if the data network is slow, then you may pause the video waiting for it to buffer more data. However, while the video is pausing, your phone may go into idle mode and the screen is locked, at that point YouTube will just stop streaming. So to watch the video you will to download it again.

Is there any way to solve this problem?

The answer is yes. All you need to do is extending the Lock screen time out, set the time period of 5-10 minutes. But if you don’t want to increase the time period for personal reason, then you will need to use third party app to help you deal with this.

Here's how to:

1. First, press the Home key to return to your Nexus 7’s Home screen.

2. Launch Google Play Store app.

3. Find and install the KeepScreen app.

- KeepScreen app will help you block the screen timeout with some selected apps that can be activated. This app is great if you would like to stream content while playing, too.

Just in case you want to extend the Lock screen Time out, go to Settings > Security. Then feel free to adjust the timeout period that you are comfortable with.

How to Transfer Data from iPhone to New iPhone 5

Just got yourself a new iPhone 5? Looking for the steps to move your data from old iPhone to new iPhone 5? You’re at the right place. In this guide, we’ll walk you through two simple methods to transfer your old iPhone data to new iPhone.

Hit the jump for detailed step-by-step instructions to transfer data from old iPhone to the new iPhone 5

mportant

If you have already booted your iPhone and started using it without restoring from backup, all you need to do is to restore your new iPhone back to factory settings. Factory reset will bring back the initial setup screen where it offers you to restore from iCloud or iTunes. To factory reset your new iPhone:
Go to Settings > General > Reset and then tap “Erase All Content and Settings”
Your iPhone will reboot and will present you with initial setup screen. Now follow any of the two methods mentioned below…

Transfer data from old iPhone to new iPhone 5 using iCloud

iCloud is the easiest way to transfer everything from your old iPhone to the new iPhone 5 without any need for a MAC or PC, given that you have a speedy internet connection and your old iPhone is running iOS 5 or later. If you’ve not yet setup your iCloud account or have a slower internet connection, we recommend you to scroll down and follow the iTunes method mentioned below which is also quite easy.

On you old iPhone, go to: Settings > iCloud, and login with your Apple ID;
Now make your choices, turn ON whatever you want to backup to iCloud;
Now scroll down and go to “Storage & Backup” and tap on “Back Up Now” button;
Once the iCloud backup process, on your old iPhone, is completed, boot your iPhone 5;
Follow the on screen iPhone setup instructions, and choose “Restore from iCloud Backup”;
Wait until the iPhone 5 restores your old iPhone data from the iCloud backup which may take several minutes depending on your internet speed, and the size of the data backed up. When finished, your iPhone 5 will have all your personal data from the old iPhone.

Transfer data from old iPhone to New iPhone 5 with iTunes

In case you don’t have iCloud setup, or your backup size is larger than the iCloud storage, or due to slower internet connection you cannot backup to iCloud, don’t worry, iTunes is there to cover you folks. You’ll need a PC or Mac with iTunes installed. Although this method is not as automated as iCloud backup is, but it’s still pretty simple and may even be a faster iPhone backup option.

Connect your old iPhone to your computer and launch iTunes;
Right click on your iPhone in iTunes sidebar, under Devices, and click “Back up”;
Wait for the backup to complete, then disconnect your old iPhone from your computer;
Turn it on, follow the on screen setup instruction;
select “Restore from iTunes Backup”, tap Next;
Now connect your new iPhone to your computer;
Select the most recent backup from the restore drop-down menu in iTunes, then click “Continue”;
When the restore process is completed, the iPhone will reboot itself and your new iPhone will have all your data that you backed up from your old iPhone.

How to Check if Your iPhone is Factory Unlocked with IMEI

Did you just got your iPhone unlocked officially from AT&T or any other carrier? or paid someone to get your iPhone factory unlocked or bought a used iPhone and now want to check if it is factory unlocked or not? Don’t worry we got you covered. Hit the jump to learn how to check your iPhone unlock status in few easy steps.

To check your iPhone factory unlock status, you need to know your iPhone’s IMEI number. IMEI number, the International Mobile Equipment Identity, is a unique identifier for all mobile phone, iPhone is no exception. An IMEI number is a 15-digit long string which can tell you a lot about your iPhone including iPhone unlock status.

There are a few online IMEI checker services that ask for your IMEI number and tell you if your iPhone is factory unlocked or not without putting a SIM from a different carrier into it. These services make it easier to check your iPhone’s SIM lock status, warranty and other information.

How to check iPhone Factory Unlock status

Here are the step-by-step instructions to check if your iPhone is carrier unlocked or not:

Find out your iPhone’s IMEI number. You can find it by going into Settings > General > About or simply dial *#06#.
Now open any web browser and go to IMEI.info and there you’ll see an input box. Enter your IMEI in that box and click “Check” button.

Website will display a chart detailing your iPhone’s model, brand and other information. To get information regarding your iPhone’s SIM lock status, click on “Free simlock and warranty status” button at bottom right corner.

Now click on the “Free SIMlock and Warranty Status Check” button.

Now it should display if your iPhone is factory unlocked or not. If your iPhone has been unlocked using unofficial methods such as Ultrasn0w or Gevey SIM unlock, it should say Locked. Additionally, it tells you about the warranty status of your device.

How to enter the Unlocking Code for a Pantech Model phone

OPTION 1 - PANTECH MODELS

1. Turn on your phone with an original SIM Card in it
2. Type the following: * # 8 6 5 6 2 5 #
3. A 'SIM Unlock' Menu will appear, press Ok
4. Enter Unlock Code + * (8 digit code)
5. Re-enter Unlock Code + * (8 digit code)
6. The phone will display 'Unlock Process Complete'
7. Press Ok
7. The phone is now unlocked.

OPTION 2 - PANTECH MODELS

1. Insert a not accepted SIM Card and turn the phone on
2. When prompted, enter the unlocking code provided
(Note: Use the onscreen keyboard and make sure that wireless mode is off)
3. Your phone will now be unlocked.

OPTION 3 - PANTECH MODELS

1. Insert an non-accepted SIM Card and turn ON your phone
2. A hidden 'Sim Unlock' Menu will appear
3. Enter the Unlock Code provided
4. The phone will display the message 'Unlock Process Complete'
5. The phone will now be unlocked.