NOKIA 6120c,No Display DONE via JUMPER!

NOKIA 6120c,No Display DONE via JUMPER!

Just wanna share this mates,

Action Taken:

Change ESD,
Change LCD,
But still problem persist..

Trace/Check lines,
and i found out that there is/or lack of 2.8v supply in VAUX.




SOLUTION:
hanap ng ibang 2.8v VAUX supply,
then maki share, )






finished product:

Many Hanset Read Flashing Error RXD<>MaxBuffSize(Unsupport File) Control This Error?

Many Hanset Read Flashing Error RXD<>MaxBuffSize(Unsupport File)

Control This Error?

1,
Maxfony F2 Read Flashing Error @Error: RXD<>MaxBuffSize, Unsupport FileSystem
2,
Error: Unsupport FileSystem.

Quote:

Problem , i am Trying to Read Flashing of Handset But Get this Problem So Now What i Do ?

Solved This Problem

Quote:

Initializing...
DA_LIB_VER_4.3.6.8
It is sensing the pinout fast...
RXD=8 TXD=3
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600701900006A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC6600L7A Flash: NOR_EN71GL064
setting the Flash Parameters...
Settings have been completed!
Reading Flash...
Error: RXD<>MaxBuffSize, Please close all other program or change baudrate and try again.


Initializing...
DA_LIB_VER_4.3.6.8
It is sensing the pinout fast...
D-=4 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM47
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600701900005A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 460800 is ok
Reading phone HW info...
Read info is done.
CPU: SC6600L7A Flash: NOR_EN71GL064
setting the Flash Parameters...
Settings have been completed!
Reading Flash...
Saved file to:
C:\Documents and Settings\Omur Faruk\My Documents\Maxfony F2\NOR_EN71GL064
All Done.
Reading Project Version...
Error: Unsupport FileSystem.

>>> Getting Mobile Connection Info...
VCC Pin:
GND Pin:
Signal Pin:1, 2, 3, 4, 6, 8, 9,
>>> Scanning Mobile PinOut...
>>> USB Pinfind No need Hold Mobile Power key...
USB Pin Out: D+:6 D-:4
>>> Scanning Mobile USB Port...
>>> Detecting COM PortCOM47
>>> Connecting Mobile...
Mobile Connection Success...
Mobile Firmware Version:Spreadtrum Boot Block version 2.0
>>> Downloading First Boot...
>>> Mobile Info
Project ID :Spreadtrum Boot Block version 1.2
CPU Name:6600
Flash ID:0x007F227E22102201
Flash Name:NOR_EN71GL064B0
Flash Size:0x00800000 -> 8M
Baud Rate is Switched To:921600
>>> Reading Flash...
All Done...

HTC EVO 4G - doesn't sync via usb Ways Solution

HTC Desire&Nexus Power On ways Solution

Htc Desire HD Backlight Not Working Solution 100% Tested

MOTOROLA Droid A855 Too Many Pattern Attempt Done By Hard Reset

Model;Motorola Droid A855



Problem;Too Many Patter Attempt...

Solution; Hard Reset

Procedure;

1.Slide The PHone To See The Keypad

2.Hold The Letter X Then Press The Power ON THen Wait



3.After To See This Logo Press Camera Button And Volume Key Until You See The Selection Text
Select Wipe Date Factory Reset



4.Select Delete All Data Wait To Show Completed




5.Reboot System Done

Download &install Cracked Apps Without Jailbreak

I've Got This App From Friend It's Totally Chinese so i Added Photos in Attachments for how to download and install
and it's tested by me

You Don't Need Jailbreak
just download the Cracked App From This App and install it

if Some one Know Chinese and Can Give us better Guide for maybe installing all or Something will be better


DOWNLOAD Beta2 2012
DOWNLOAd Beta1 2013

Attached Thumbnails

     

Huawei U7517, U7510, U7515, U7519 u75xx Hard Reset

Huawei U7517, U7510, U7515, U7519 u75xx Hard Reset



Turn off and turn on celular phone.
When ordering put a wrong key of 4 digits, eg 1234 and den accept
While the display says password error, press the END key twice quickly.
This will enter the phone in a special way.
Now pressed the dial pad icon (2nd icon phone left. To right)
Place * 1673492846 then press the key cursor (DPAD) down

Entering a phone hidden menu (Test Mode)
** (Do not touch anything extra if you have no experience) **

Select option 8 (Other)
Select option 1 (Reset to factory settings)
Again select option 1 (Confirm reset factory setting) ________________
When you ask a question, remember to give a detailed explanation of the problem, to make it easier to help you.

..::Lava Flash File and Flasher Collection::..

1.2303HXusbserial.rar
2.B5Q.rar
3.KKT12.rar
4.M23.rar
5.KKT22.rar
6.UpdatedFlashTool.rar
7.ARC02+.rar
8.KKT24_Upgraded_Sw–ImprovedVideoRecording.rar
9.KKT25.rar
10.KKT30_***_100210.rar
11.A9.rar (Comeing soon)
12.KKT26.rar
13.KKT32.rar
14.KKT23C.rar
15.KKT34.rar
16.KKT24+.rar
17.KKT1.rar
18.KKT11.rar
19.KKT30.rar
20.B2A.rar
21.ARC03.rar
22.B5A.rar
23.B2Q.rar
24.kKT11_Invert Display.rar
25.KKT22_Invert Display.rar
26.kkt15.rar

One Link of Collection

New Link
Flashtool_KKT1_11_22.zip
KKT22_sw.zip
LAVA_USB_Driver_v1.0948.0.rar

How To Hard Reset Micromax A45

How To Hard Reset Micromax A45

---

> Press and hold Volume up + Volume Down + power on
> you will see 2 options (recovery mode / Factore mode) press volume up to select recovery mode
> select wipe data/ factory reset by volume down button then touch menu
> volume down to select yes--delete all user data then touch menu
> reboot system now