All About Mobiles

Software Flashing Instructions for Primo-C1

1. Double click Setup.exe to install the driver.

2. Double click ResearchDownload.exe and open the flashing tool.

3. Click the first button, select the correct .pac file and confirm.

4. Click the third button to get ready to start.

5. Connect the handset to PC with USB data cable, Long press volume down key and insert the battery. Now it starts to install the software.

6. When it shows Passed in green, the installation is completed.

Primo C1 SW link.txt (0.04 kB - downloaded 61 times.)

New official firmware for primo F1 (Build Number: A51B_WALTON_V0_0_9) [solved: black screen, memory & others bugs]

D/L text file from attachment "Primo F1 FW v. 0_0_9" you will get download link

Guide:

1. Install USB cable drive software. (From "Driver" folder )
2. Open Flash Tools MultiportDownload.exe (From "Download Tools" folder)
3. Select smart phone and press ok.
4. Click "Select file" for select scatter file
5. Select scatter file (MT6575_Android_scatter_emmc) from software folder (Under "WALTON_Primo_F1_Firmware" folder)
6. Download file load successfully will show. click "ok" button.
7. Press "Start all"

8. Under POWER OFF mode press & hold Volume up and down key together, then put USB cable in to Handset charging port
(with battery). Software process will be start within few second.

9. Wait till complete software update process.

** NOTES... If auto driver installation failed (step 1) then install manually after ( step 8 ) connect USB Cable as soon as possible.)

Primo F1 FW v. 0_0_9 new.txt (0.11 kB - downloaded 80 times.)

1. install driver.

2.Open Flash Tool

3.Open Download Agent and select MTK_AllinOne_DA

4. Open scatter_loading and select SW---> WBWS212WA_0301_T5067 MT6577_Android_scatter_emmc

5. Click Firmware-> Upgrade and connect USB with mobile (without battery)
6. Insert Battery then start downloading ..
7.When it shows Firmware Upgrade with green colour, the installation is completed.

Primo D1 SW link.txt (0.05 kB - downloaded 111 times.)

1. Install driver.

2.Open Flash Tool

3. Open Download Agent and select MTK_AllinOne_DA

4. Open scatter_loading and select scatter file
SW---> WBW6803WA_0410_T8142→ MT6577_Android_scatter_emmc

5. Click Firmware->Upgrade and connect USB cable with mobile without battery

6. Insert Battery then start downloading..

7. When it shows Firmware Upgrade , then installation is completed.

After Firmware Upgrade give Reset to Factory Setting

here you go, you are now on Jelly Bean!!!

Download

1. Install driver.

2. Open Flash Tool

3. Open Download Agent and select MTK_AllinOne_DA

4. Open scatter_loading and select scatter file
SW---> WBW6803WA_0410_T8142 MT6577_Android_scatter_emmc

5. Click Firmware->Upgrade and connect USB cable with mobile without battery

6. Insert Battery then start downloading..

7. When it shows Firmware Upgrade , then installation is completed.

After Firmware Upgrade give Reset to Factory Setting

Firmware Download link: http://goo.gl/3tMHN

WALTON Primo G2 Software update (AP+BP) Guide

Driver installation

1) Install AP part driver
Power off handset, press “Power key + Voice Up key” until the screen shows green, plug in usb cable, PC will remind you of installing new hardware. Unzip “ Driver”, select adb driver file, install AP driver.

Path: Right click on My computer>Manage>Device manager>Android(Yellow notification)>Update driver software>browse path> select adb folder >Continue anyway>finish
When you install AP driver successfully, you will find “Fastboot interface” in device manager. As below

2) Install BP part driver

(i) Power off handset, press “Power key + Voice Down key” until the screen shows QPST mode, plug in 5Pin USB cable, Unzip “Driver”, select HK11-VB717-27_1.0.56 driver file, install BP driver.
Path: Right click on My computer>Manage>Device manager>Tiyanyu HS-USB Driver (Yellow notification)>Update driver software>browse path> HK11-VB717-27_1.0.56\Win32\x86\free >Continue anyway>finish.
(ii) When your BP driver is installed successfully, you will find Qualcomm HS-USB ports in device manager. As below:

Software Upgrading:

1.Download BP
Open Primo Download V1.2.3 tool, set your handset into BP mode (Power key+ Voice down key) and connect your phone with USB cable.

1. Click set path>Browse folder>Select 592522_8550_WCDMA_V000001
2. Click Download All

2.AP Download:

Open Primo Flasher V1.0 tool, set your handset into AP mode (Power key+ Voice up key) and connect your phone with USB cable.

1. Click Set path>Browse folder>Select 592522_8550_V001006
2. Click Ok for Start download.

Note: If your antivirus detects Primo Flash Tool as virus, disable your antivirus till software is finish.

Walton primo G2 firmware download link.txt (0.04 kB - downloaded 86 times.)

1.Install driver:
1st step: Power Off the phone and Connect your phone with PC via USB cable. Now go to My Computer>Manage> Other devices> MT65xx Preloader

2nd step: A window will appear like below and select Browse my computer for driver software

3rd step: To select driver go to driver folder> USB VCOM Driver> Win7

4th step: Windows security window will appear. Select Install this driver software anyway

5th step: Wait until Windows has successfully updated your driver software

6th step: Now go to Driver Folder> Open MS_USB_ComPort_Driver_exe_v1.1032.1 > Install Driver

2.Open Flash Tool

3.Open Download Agent and select MTK_AllinOne_DA

4. Open scatter_loading and select SW---> WBW5882WA_0301_T5182
MT6589_Android_scatter_emmc

5. Click Download and connect USB with mobile (without battery)
6.When it shows Download ok in green, the installation is completed.

Release Note:
1> Update OS from 4.2.1 to 4.2.2
2> Minor bug fixing
3> More battery stand by time
4> Overall performance is more smooth, faster than previous

1.Install driver:

1st step: Power Off the phone and Connect your phone with PC via USB cable. Now go to My Computer>Manage> Other devices> MT65xx Preloader