Welcome to Nokiasolution24.blogspot.com. Here you can find About Mobiles solution.
All About Mobiles
http://www.infolinks.com/join-us?aid=2084565
Blackberry Torch 9800 Hard Reset, Wipe and Restore to factory default settings procedures
Blackberry Torch 9800 Hard Reset, Wipe and Restore to factory default settings procedures
Note:
This process will delete all stored data stored on your Blackberry
Torch 9800, ensure to back up it first before proceeding.To Reset Settings of Blackberry Torch 9800
1. From the Home screen, press the Menu key.
2. Select Reset Settings.
3. Check the settings you wish to set to default:
* Wallpaper
* Layout
* Download Folder
* Icon Arrangement
4. Click Apply, then Yes to confirm.To Hard Reset Blackberry Torch 9800
The BlackBerry Torch manual describes a hard reset as fulling the battery out for about 10 seconds, then reinserting the battery back into the device again. But, this does not clear up many temporary issues with the device, there are other resets procedure you can perform.Soft Reset
Press ALT + RIGHT SHIFT(CAP) + DELETE.Double-Soft Reset
Press ALT + RIGHT SHIFT(CAP) + DELETE . The screen will go blank for a few seconds. When the screen comes back on, immediately press ALT + RIGHT SHIFT(CAP) + DELETE again.To Wipe All Data stored on Blackberry Torch 9800
1. Select the Options app under the All tab.
2. Select Security.
3. Select Security Wipe.
4. Check the items you wish to remove:* Emails, Contacts, etc.* User Installed Applications* Media Card
5. Type blackberry in the box, then tap Wipe. The device will then take a few minutes to wipe all of the data. The BlackBerry Torch 9800 will then reboot restore to factory default state settings.
To Reboot/Reset BlackBerry Torch 9800
If BlackBerry Torch device is frozen or unresponsive, you’ll of course want to restart it. You can do it by pulling out the battery, but there is a simple keystroke you can use to reboot.
Just press the Left Shift, Alt and Delete buttons simultaneously. The device should then restart.
1. From the Home screen, press the Menu key.
2. Select Reset Settings.
3. Check the settings you wish to set to default:
* Wallpaper
* Layout
* Download Folder
* Icon Arrangement
4. Click Apply, then Yes to confirm.To Hard Reset Blackberry Torch 9800
The BlackBerry Torch manual describes a hard reset as fulling the battery out for about 10 seconds, then reinserting the battery back into the device again. But, this does not clear up many temporary issues with the device, there are other resets procedure you can perform.Soft Reset
Press ALT + RIGHT SHIFT(CAP) + DELETE.Double-Soft Reset
Press ALT + RIGHT SHIFT(CAP) + DELETE . The screen will go blank for a few seconds. When the screen comes back on, immediately press ALT + RIGHT SHIFT(CAP) + DELETE again.To Wipe All Data stored on Blackberry Torch 9800
1. Select the Options app under the All tab.
2. Select Security.
3. Select Security Wipe.
4. Check the items you wish to remove:* Emails, Contacts, etc.* User Installed Applications* Media Card
5. Type blackberry in the box, then tap Wipe. The device will then take a few minutes to wipe all of the data. The BlackBerry Torch 9800 will then reboot restore to factory default state settings.
To Reboot/Reset BlackBerry Torch 9800
If BlackBerry Torch device is frozen or unresponsive, you’ll of course want to restart it. You can do it by pulling out the battery, but there is a simple keystroke you can use to reboot.
Just press the Left Shift, Alt and Delete buttons simultaneously. The device should then restart.
Blackberry MEP Reader, Code Calculator
Blackberry MEP Reader, Code Calculator
Can be use in calculating or generating codes like cyclone box . This is an alternative way to
calculate codes from cyclone..coz' connecting USB in cyclone sometimes takes hard
Download
calculate codes from cyclone..coz' connecting USB in cyclone sometimes takes hard
Download
iphone 4GS China All Hardware Solution
iphone 4GS China All Hardware Solution
China iphone 4GS Auto of Solution,Power Button Ways,Mic WaysCharging Solution,Fake Charging Solution.
DOWNLOAD
Jailbreak ALL iOS 6.0 to 6.x.x Devices With Evasi0n 1.4
Jailbreak ALL iOS 6.0 to 6.x.x Devices With Evasi0n 1.4
evasi0n - iOS 6.0-6.1.2 Jailbreak
Compatible with all iPhone, iPod touch, iPad and iPad mini models running iOS 6.0 through 6.1
Version 1.4
-Support For 6.1.2 On All iPhone and iPad And iPod
Version 1.3
- Support for 6.1.1 on the iPhone 4S.
Version 1.2
- Disable OTA updates.
- Correct timezone issue in evasi0n binary if client fails to correct it.
Version 1.1
- prevent Weather app from appearing on iPads.
- mitigated the long reboot issue.
- fix issue with not working after connecting multiple iOS devices
- fix blinking of the jailbreak instructions on OS X.
- codesigned Mac app.
Version 1.0
- first public release
-5 minutes of your time!
-A computer, running Windows (XP minimum), Mac OS X (10.6 minimum) or Linux (x86 / x86_64).
-An iPhone, iPad or iPod running iOS 6.0 through 6.1 (you may check in Settings / General / About => Version).
-A USB cable to connect the device to the computer.
-Backup your device using iTunes (or iCloud) before using evasi0n. If something breaks, you'll always be able to recover your data.
-Please disable the lock passcode of your iOS device before using evasi0n. It can cause issues.
-Avoid all iOS and iTunes related tasks until evasi0n is complete. Why not just enjoy a brief break from the computer to stretch your legs?.
-If the process gets stuck somewhere, it's safe to restart the program, reboot the device (if necessary by holding down Power and Home until it shuts down), and rerun the process.
-If you get an error on OS X 10.8 saying that evasi0n can't be opened, control-click (or right-click) the app and on the revealed context menu, choose 'Open.' On the ensuing dialogue box, choose 'Open' as well.
Compatible with all iPhone, iPod touch, iPad and iPad mini models running iOS 6.0 through 6.1
Version 1.4
-Support For 6.1.2 On All iPhone and iPad And iPod
Version 1.3
- Support for 6.1.1 on the iPhone 4S.
Version 1.2
- Disable OTA updates.
- Correct timezone issue in evasi0n binary if client fails to correct it.
Version 1.1
- prevent Weather app from appearing on iPads.
- mitigated the long reboot issue.
- fix issue with not working after connecting multiple iOS devices
- fix blinking of the jailbreak instructions on OS X.
- codesigned Mac app.
Version 1.0
- first public release
Requirements
-5 minutes of your time!
-A computer, running Windows (XP minimum), Mac OS X (10.6 minimum) or Linux (x86 / x86_64).
-An iPhone, iPad or iPod running iOS 6.0 through 6.1 (you may check in Settings / General / About => Version).
-A USB cable to connect the device to the computer.
Important! Read me!
-Backup your device using iTunes (or iCloud) before using evasi0n. If something breaks, you'll always be able to recover your data.
-Please disable the lock passcode of your iOS device before using evasi0n. It can cause issues.
-Avoid all iOS and iTunes related tasks until evasi0n is complete. Why not just enjoy a brief break from the computer to stretch your legs?.
-If the process gets stuck somewhere, it's safe to restart the program, reboot the device (if necessary by holding down Power and Home until it shuts down), and rerun the process.
-If you get an error on OS X 10.8 saying that evasi0n can't be opened, control-click (or right-click) the app and on the revealed context menu, choose 'Open.' On the ensuing dialogue box, choose 'Open' as well.
Official Mirrors
Linux
Windows
Non Official Mirrors
3GS Jailbreak Unlock Guide ios 6.0.1 (tethered)
3GS Jailbreak Unlock Guide ios 6.0.1 (tethered)
What we need to do this?
1= A iPhone 3gs with supported bass band for unlock with ultrasnow.2= iPhone2_1_6.0.1_10A523_Restore.ipsw
3= iPhone2,1_6.0_10A403_Restore.ipsw
4= redsn0w_win_0.9.15b3 or later version
Warning
Before starting be very careful do full backup of your phone using iTunes. also save SHSH blobs using redsnow to revert back to your current version of ios.This method is tested by me and working.you see in pictures. do at your own risk i am not responsible of any damage or any mistake during this work.
after doing backup of your device.
connect iphone with pc and open redsn0w_win_0.9.15b3 then go to Extra > Even more > Restore
and select iPhone2_1_6.0.1_10A523_Restore.ipsw redsnow prompt you that redsnow doesn't recognize this ipsw but it can still prevent a bassband update select yes.
redsnow will process ipsw and then restore to iphone this will tack more then 10 minutes approx to complete this possess.
now you need to jailbreak this phone to get working
open redsn0w_win_0.9.15b3 then Extras and select ipsw and select
iPhone2_1_6.0_10A403_Restore.ipsw Now go back and press jailbreak.
and follow the instruction given by redsnow. this will complete in few minutes. after this possess complete you will see phone in working condition but when you press cydia it will close immediately don.t worry.
now open redsnow again and press Extras and then Just boot (just boot tethered right now) after this phone will be normal cydia and other apps will work now.
now go to cydia and add source pointed in picture. and install ultrasnow and ultrasnow fixer.
after installing ultrasnow and ultrasnow fixer phone should be unlocked. if still searching just reinstall ultrasnow. phone will recive network signals now.
This is tethered jailbreak because untethered jailbreak for ios 6.0.1 is not yet released.
So Good Luck all of you friends who give some time to read this.
Apple:Download link for an iOS firmware or a jailbreak tools
Apple:Download link for an iOS firmware or a jailbreak tools
iOS Firmwares
iPad
iPad 4: 6.0.1
iPad mini (wifi): 6.0.2, 6.0.1
iPad mini (GSM): 6.0.2
iPad mini (CDMA): 6.0.2
iPad 3 (wifi): 6.0.1, 6.0
iPad 3 (GSM): 6.0.1, 6.0
iPad 3 (CDMA): 6.0.1, 6.0
iPad 2 (new gen): 6.0.1
iPad 2: 6.0.1, 6.0
iPad 2 (GSM): 6.0.1, 6.0
iPad 2 (CDMA): 6.0.1, 6.0
iPad 4: 6.0.1
iPad mini (wifi): 6.0.2, 6.0.1
iPad mini (GSM): 6.0.2
iPad mini (CDMA): 6.0.2
iPad 3 (wifi): 6.0.1, 6.0
iPad 3 (GSM): 6.0.1, 6.0
iPad 3 (CDMA): 6.0.1, 6.0
iPad 2 (new gen): 6.0.1
iPad 2: 6.0.1, 6.0
iPad 2 (GSM): 6.0.1, 6.0
iPad 2 (CDMA): 6.0.1, 6.0
iPhone
iPhone 5 (GSM): 6.0.2, 6.0.1, 6.0
iPhone 5 (CDMA): 6.0.2, 6.0.1, 6.0
iPhone 4S: 6.0.1, 6.0
iPhone 4 (GSM): 6.0.1, 6.0
iPhone 4 (3,2): 6.0.1, 6.0
iPhone 4 (CDMA): 6.0.1, 6.0
iPhone 3GS: 6.0.1, 6.0
iPhone 5 (GSM): 6.0.2, 6.0.1, 6.0
iPhone 5 (CDMA): 6.0.2, 6.0.1, 6.0
iPhone 4S: 6.0.1, 6.0
iPhone 4 (GSM): 6.0.1, 6.0
iPhone 4 (3,2): 6.0.1, 6.0
iPhone 4 (CDMA): 6.0.1, 6.0
iPhone 3GS: 6.0.1, 6.0
Older iOS Firmwares
iPad
iPad 3 (wifi): 5.1.1, 5.1
iPad 3 (CDMA): 5.1.1, 5.1
iPad 3 (GSM): 5.1.1, 5.1
iPad 2: 5.1.1, 5.1, 5.0.1, 5.0, 4.3.5, 4.3.4, 4.3.3, 4.3.2, 4.3.1
iPad 2 (GSM): 5.1.1, 5.1, 5.0.1, 5.0, 4.3.5, 4.3.4, 4.3.3
iPad 2 (CDMA): 5.1.1, 5.1, 5.0.1, 5.0, 4.3.5, 4.3.4, 4.3.3
iPad 1: 5.1.1, 5.1, 5.0.1, 5.0, 4.3.5, 4.3.4, 4.3.3, 4.3.2, 4.3.1, 4.3, 4.2.1, 3.2.2, 3.2.1, 3.2.0
iPad 3 (wifi): 5.1.1, 5.1
iPad 3 (CDMA): 5.1.1, 5.1
iPad 3 (GSM): 5.1.1, 5.1
iPad 2: 5.1.1, 5.1, 5.0.1, 5.0, 4.3.5, 4.3.4, 4.3.3, 4.3.2, 4.3.1
iPad 2 (GSM): 5.1.1, 5.1, 5.0.1, 5.0, 4.3.5, 4.3.4, 4.3.3
iPad 2 (CDMA): 5.1.1, 5.1, 5.0.1, 5.0, 4.3.5, 4.3.4, 4.3.3
iPad 1: 5.1.1, 5.1, 5.0.1, 5.0, 4.3.5, 4.3.4, 4.3.3, 4.3.2, 4.3.1, 4.3, 4.2.1, 3.2.2, 3.2.1, 3.2.0
iPhone
iPhone 4S: 5.1.1, 5.1, 5.0.1 (build 9A406), 5.0.1, 5.0
iPhone 4 (GSM): 5.1.1 (build 9B208), 5.1.1, 5.1, 5.0.1, 5.0, 4.3.5, 4.3.4, 4.3.3, 4.3.2, 4.3.1,4.3, 4.2.1, 4.1, 4.0.2, 4.0.1, 4.0
iPhone 4 (CDMA): 5.1.1, 5.1, 5.0.1, 5.0, 4.3.5, 4.2.9, 4.2.8, 4.2.7
iPhone 3GS: 5.1.1, 5.1, 5.0.1, 5.0, 4.3.5, 4.3.4, 4.3.3, 4.3.2, 4.3.1, 4.3, 4.2.1, 4.1, 4.0.2, 4.0.1,4.0, 3.1.3, 3.1.2, 3.1, 3.0.1, 3.0
iPhone 3G: 4.2.1, 4.1, 4.0.2, 4.0.1, 4.0, 3.1.3, 3.1.2, 3.1, 3.0.1, 3.0, 2.2.1, 2.2, 2.1, 2.0.2,2.0.1, 2.0
iPhone 2G: 3.1.3, 3.1.2, 3.1, 3.0.1, 3.0, 2.2.1, 2.2, 2.1, 2.0.2, 2.0.1, 2.0, 1.1.4, 1.1.3, 1.1.2,1.1.1, 1.0.2, 1.0.1, 1.0
iPhone 4S: 5.1.1, 5.1, 5.0.1 (build 9A406), 5.0.1, 5.0
iPhone 4 (GSM): 5.1.1 (build 9B208), 5.1.1, 5.1, 5.0.1, 5.0, 4.3.5, 4.3.4, 4.3.3, 4.3.2, 4.3.1,4.3, 4.2.1, 4.1, 4.0.2, 4.0.1, 4.0
iPhone 4 (CDMA): 5.1.1, 5.1, 5.0.1, 5.0, 4.3.5, 4.2.9, 4.2.8, 4.2.7
iPhone 3GS: 5.1.1, 5.1, 5.0.1, 5.0, 4.3.5, 4.3.4, 4.3.3, 4.3.2, 4.3.1, 4.3, 4.2.1, 4.1, 4.0.2, 4.0.1,4.0, 3.1.3, 3.1.2, 3.1, 3.0.1, 3.0
iPhone 3G: 4.2.1, 4.1, 4.0.2, 4.0.1, 4.0, 3.1.3, 3.1.2, 3.1, 3.0.1, 3.0, 2.2.1, 2.2, 2.1, 2.0.2,2.0.1, 2.0
iPhone 2G: 3.1.3, 3.1.2, 3.1, 3.0.1, 3.0, 2.2.1, 2.2, 2.1, 2.0.2, 2.0.1, 2.0, 1.1.4, 1.1.3, 1.1.2,1.1.1, 1.0.2, 1.0.1, 1.0
iPod touch
iPod touch 4G: 5.1.1, 5.1, 5.0.1, 5.0, 4.3.5, 4.3.4, 4.3.3, 4.3.2, 4.3.1, 4.3, 4.2.1, 4.1
iPod touch 3G: 5.1.1, 5.1, 5.0.1, 5.0, 4.3.5, 4.3.4, 4.3.3, 4.3.2, 4.3.1, 4.3, 4.2.1, 4.1, 4.0.2,4.0, 3.1.3, 3.1.2, 3.1.1
iPod touch 2G: 4.2.1, 4.1, 4.0.2, 4.0, 3.1.1, 2.2.1, 2.2
iPod touch: 3.1.1, 2.2.1, 2.2, 2.0.1, 1.1.5, 1.1.4, 1.1.3, 1.1.2, 1.1.1, 1.0
iPod touch 4G: 5.1.1, 5.1, 5.0.1, 5.0, 4.3.5, 4.3.4, 4.3.3, 4.3.2, 4.3.1, 4.3, 4.2.1, 4.1
iPod touch 3G: 5.1.1, 5.1, 5.0.1, 5.0, 4.3.5, 4.3.4, 4.3.3, 4.3.2, 4.3.1, 4.3, 4.2.1, 4.1, 4.0.2,4.0, 3.1.3, 3.1.2, 3.1.1
iPod touch 2G: 4.2.1, 4.1, 4.0.2, 4.0, 3.1.1, 2.2.1, 2.2
iPod touch: 3.1.1, 2.2.1, 2.2, 2.0.1, 1.1.5, 1.1.4, 1.1.3, 1.1.2, 1.1.1, 1.0
Apple TV
Apple TV 3G: 5.1, 5.0.2, 5.0.1, 5.0 (build 9B206f), 5.0
Apple TV 2G: 5.1, 5.0.2, 5.0.1, 5.0 (build 9B206f), 5.0, 4.4.4, 4.4.3, 4.4.1, 4.4, 4.3, 4.2.2, 4.4,4.3 (build 8F455), 4.3 (build 8F305), 4.3 (build 8F202), 4.3 (build 8F191m), 4.2.1, 4.2, 4.1
Apple TV 3G: 5.1, 5.0.2, 5.0.1, 5.0 (build 9B206f), 5.0
Apple TV 2G: 5.1, 5.0.2, 5.0.1, 5.0 (build 9B206f), 5.0, 4.4.4, 4.4.3, 4.4.1, 4.4, 4.3, 4.2.2, 4.4,4.3 (build 8F455), 4.3 (build 8F305), 4.3 (build 8F202), 4.3 (build 8F191m), 4.2.1, 4.2, 4.1
Jailbreak Tools
These jailbreak tools can be used to jailbreak iDevices from a Mac and Windows computer.
Absinthe
- Absinthe 2.0.4: Mac - Windows - Linux
- Absinthe 2.0.2: Mac - Windows - Linux
- Absinthe 2.0.1: Mac - Windows - Linux
- Absinthe 2.0: Mac – Windows – Linux
- Absinthe v0.4: Mac - Windows - Linux
- Absinthe v0.3: Mac - Windows - Linux
- Absinthe v0.2: Mac – Windows
- Absinthe v0.1.2-2 (Mac only)
- Absinthe v0.1.2-1 (Mac only)
- RedSn0w 0.9.15 beta 3 Mac • Windows
- RedSn0w 0.9.15 beta 2 Mac • Windows
- RedSn0w 0.9.15 beta 1 Mac • Windows
- RedSnow 0.9.13 dev 4 Mac • Windows
- RedSn0w 0.9.13 dev 3 Mac • Windows
- RedSn0w 0.9.14 beta 2 Mac • Windows
- RedSn0w 0.9.14 beta 1 Mac • Windows
- RedSn0w 0.9.13 dev 2: Mac • Windows
- RedSn0w 0.9.13 dev 1: Mac • Windows
- RedSn0w 0.9.12 beta 2: Mac • Windows
- RedSn0w 0.9.12 beta 1: Mac • Windows
- RedSn0w 0.9.11 beta 4: Mac • Windows
- RedSn0w 0.9.11 beta 2: Mac • Windows
- RedSn0w 0.9.11 beta 1: Mac • Windows
- RedSn0w 0.9.10 beta 8b: Mac • Windows
- RedSn0w 0.9.10 beta 7: Mac • Windows
- RedSn0w 0.9.10 beta 6: Mac(b) • Windows
- RedSn0w 0.9.10 beta 5: Mac • Windows
- RedSn0w CLI 0.4.3: Mac • Windows
- RedSn0w 0.9.10 beta 4: Mac • Windows
- RedSnow 0.9.10 beta 3: Mac • Windows
- RedSn0w 0.9.10 beta 2: Mac • Windows
- RedSn0w 0.9.10 beta 1: Mac • Windows
- RedSn0w 0.9.9 beta 9d: Mac • Windows
- RedSn0w 0.9.9 beta 9: Mac • Windows
- RedSn0w 0.9.9 beta 8: Mac • Windows
- RedSn0w 0.9.9 beta 7: Mac • Windows
- RedSn0w 0.9.9 beta 6: Mac • Windows
- RedSn0w 0.9.9 beta 5: Mac
- RedSn0w 0.9.9 beta 4: Windows
- RedSn0w 0.9.9 beta 3: Mac • Windows
- RedSn0w 0.9.9 beta 2: Mac • Windows
- RedSn0w 0.9.9 beta 1: Mac • Windows
- RedSn0w 0.9.8 beta 7: Mac • Windows
- RedSn0w 0.9.8 beta 6: Mac • Windows
- RedSn0w 0.9.8 beta 5: Mac • Windows
- RedSn0w 0.9.8 beta 4: Mac • Windows
- RedSn0w 0.9.8 beta 3: Mac • Windows
- RedSn0w 0.9.8 beta 2: Mac • Windows
- RedSn0w 0.9.8 beta 1: Mac • Windows
- RedSn0w 0.9.6rc16: Mac • Windows
- RedSn0w 0.9.6rc15: Mac • Windows
- RedSn0w 0.9.6rc14: Mac • Windows
- RedSn0w 0.9.6rc13: Mac • Windows
- RedSn0w 0.9.6rc12: Mac • Windows
- RedSn0w 0.9.6rc11: Mac • Windows
- RedSn0w 0.9.6rc9: Mac • Windows
- RedSn0w 0.9.7 beta 6: Mac
- RedSn0w 0.9.7 beta 5: Mac
- RedSn0w 0.9.6 RC8: Mac • Windows
- RedSn0w 0.9.6 RC7: Mac • Windows
- RedSn0w 0.9.7 beta 4: Mac
- RedSn0w 0.9.7 beta 3: Mac
- RedSn0w 0.9.7 beta 2: Mac
- RedSn0w 0.9.7 beta 1: Mac
- RedSn0w 0.9.6 beta 6: Mac • Windows
- RedSn0w 0.9.6 beta 5: Mac • Windows
- RedSn0w 0.9.6 beta 4: Mac • Windows
- RedSn0w 0.9.6 beta 3: Mac • Windows
- RedSn0w 0.9.6 beta 2: Mac • Windows
- RedSn0w 0.9.6 beta 1: Mac • Windows
- RedSn0w 0.9.5b5-5: Windows • Mac
- RedSn0w 0.9.3: Mac
- RedSn0w 0.9.3: Windows
- RedSn0w 0.8 3GS: Windows
- RedSn0w 0.8 3GS: Mac
- RedSn0w 3.0: Windows
- RedSn0w 3.0: Mac OS X
Subscribe to:
Posts (Atom)