All About Mobiles

http://www.infolinks.com/join-us?aid=2084565

Nokia 6280 Power Switch Button On Off Problem Solution Jumpers Way

if you have nokia 6280 dead and no power problem then try to charge it if it is charging but not getting power on it means its power button switch is not working proper.

check poser switch and replace it with a new one.and also this image is helpful in case if power switch button prints are damage then you can make these jumpers to solve power switch button problem in nokia 6280

Nokia X2 Network Problem Signal Ways Solution Jumpers

If X2 network problem or a low signal problem in your mobile solution you can do the following diagram with this post.look attached to the chart and you can see a few items in red
Nokia X2 Network Problem Signal Ways Solution Jumpers.

and the various colored lines of the components used in the network function in the Nokia x2.clean these components if there is no water damage or rust than enables the board to dry under electric light bulb for a few coins, so it can be dry or use low heat with hot air, you may need to change these parts, if not solve the problem with just cleaning and service process.

nokia x2 flash light solution

If Nokia X2-00 flash light is not working then we can not take pictures in dark light, night mode. It can be cause of flash light value damages or flash light IC. Water damage or burn parts can be cause of the flash light problem in Nokia X2-00.
nokia x2 flash light solution
In above diagram both parts are identified in red liens. Check the flash Ic clean it and then re flow it with hot air. If re flow of flash light is not working then replace it with new one to solve flash light problem of Nokia X2-00

nokia x2-00 lcd ways display solution

If Nokia X2-00 lcd is not working, Nokia X2-00 White display, Nokia X2-00 blank lcd, and all other problems of LCD display you are facing. You can solve them by replacement of LCD filter IC.
nokia x2-00 lcd ways display solution
In above diagram red line is given to identify the LCD filter IC location. These two LCD IC are used in Display function of Nokia X2-00. Keep in mind if there is some rust or carbon and water damages make it clean with electronics clean and then apply hot air to make it dry.
Once you make it dry try to re sold and re flow these two LCD IC and then check. Replace LCD of Nokia X2-00 and if it not work then replace these two Lcd display filter IC
to solve lcd display problem of nokia X2-00

nokia x2-00 light solution

If Nokia X2-00 Lcd light is not working that can be problem of Nokia X2-00 LCD, Lcd light Ic and ways. So to solve Lcd light problem in Nokia X2-00 check all these tracks that are provided in bellow diagram.
nokia x2-00 light solution
The above repairing diagram of Nokia X2-00 lcd light problem have some different color lines these linnes are identig=fing paths and tracks of parts that are used in light function of Nokia X2-00.
So check all these track and apply jumpers if any of these tracks is missing. Replace LCD and parts that are given in step two of the above diagram

nokia x2-00 ear speaker problem

If you have ear piece speaker problem in Nokia X2-00 then it can be problem of missing tracks and water damage. Due to water damages rust and carbon dameg the tracks and paths and may damage the parts also.
nokia x2-00 ear speaker problem
After dis assaambly of Nokia X2-00 Check the whole mother board for rust carbon and water damages make it clean with electronics cleaner and apply heat with hot air to make it dry.
find out double resistance as shwon in above diagram and check ear piece speaker ways apply jumpers if broken links and you may also can replace these double resistance.
To solve nokia x2-00 speaker ear piece problem

nokia x2-00 mmc ic jumper solution

If Memory card is not working in Nokia X2-00 and you are not able to used memory card in Nokia X2-00. It can be cause of water damage in it. It can be due to missing parts and damage prints and pins of memory card jacket.
nokia x2-00 mmc ic jumper solution
After disassamble of Nokia X2-00 checck the mother board if there is some water damages rust carbon or burn parts. Clecn all the rust with electronics cleaner and apply heat to make it dry.
Find out the MMC IC that is inline with red color in above diagram and re sold and re flow it to solve MMC memory card problem in Nokia X2-00

Etel M77 A china mobile sim ways insert sim problem jumpers solution

this diagram is about insert sim problem solution and also how to make jumpers of sim problem in china etel m77a.in this diagram all links are indicated with different colors so that can be identified easily check all these links with electronics meter and then if any of them is broken make these jumpers.

you may have to change this small ic that is used in sim function in china mobiles.mostly all china mobile board use same links here is only the difference of brand name and also different of ic places in different boards.this diagram is made by gsm sri lanka.

Nokia N73 Camera Problem Solution Jumper Ways

if you are facing camera not working problem camera standby problem then here is a diagram that will help you to solve all camera problems in nokia n73.

remove this small ic that is used in camera function and then make these jumpers.which is shown in red line.there are some more camera problem solutions that are given bellow so you can also check some of the bellow

Nokia 2630 On Off button Ways Jumpers Problem Solution

if you are facing nokia 2630 dead problem then check it with a charger if it shows charging but can not be on off it means its on of button is not working properly

so here is a diagram that will help you vary much for the solution of on off button in nokia 2630.make these jumpers as shown in diagram given with the post and wash keypad ic with electronics cleaner and leave it to dry for a few mint so that can be dry.

Nokia 1202 Lcd Light Solution without light ic.Jumpers Ways

here is a new diagram sent to us by universal mobile solution one of our subscriber in this diagram he said that we can solve light problem in nokia 1202 without light ic.

so lets take a look at the diagram in it we have to remove light ic and then make jumpers to the lcd lights as shown in diagram.make jumper as indicated with red line and then make jumper to the transistor and also the other yellow color shows to make jumper to both lcd lights and then to the ground.i hope it will work good and do not forget to comment on it.

for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.

Nokia 1650 Light Problem Solution Ways Jumpers Links

here is a diagram that will show you the path of light in nokia 1650 so take a look at the diagram attached with this post and in it you can see all that light links with red line.

print from pin 2 of lcd jack goes to light and one light print is ground which is indicated with black color in diagram.and green color show that these two points have same value.if one of them is broken we can use a jumper as indicated with green color.

Nokia 3110 Lcd Display Blinking Problem Solution Ways Jumpers

it is a solution to solve blinking lcd in nokia 3110.so take a look at this diagram which is given with this diagram.so please clean all these parts that are indicated in diagram with any electronics cleaner and leave the board to dry for a few mints.

after a few mint when it is hot and dry check if not solve then change display ic and also a few parts that are shown in diagram.

Nokia 5130 Restart in making call problem solution ways jumpers

nokia 5130 restart problem when make a call can be solve with fowling this diagram that is attached with this post.take a look at this diagram and we will find some components that are used and become reason of this problem.

so clean this area with ctc (electronics cleaner) and then leave it to dry for a few mint under electrical bulb.if problem can not be solve change these parts that are inline with red lines

nokia x2-00 camera on standby solution

Nokia X2-00 Camera is not working, Camera stand by in Nokia X2-00 can be cause of water damages or missing burn parts in it. After dis assembly check the whole mother board for water damages or rust in it.
nokia x2-00 camera on standby solution
As in above diagram you can find out parts that are used in camera function of Nokia X2-00. Find out all these tracks and apply jumpers if any track is missing.Different color lines are indicating parts that are in the same serias.
In above diagram you can see two main steps in first steps check value of components and in second part apply jumpers.

Sony Ericsson K310 Aline Battery Problem Solution Jumpers Ways

here is an other diagram and source is gsm srilanka in this diagram we see scratched area and a link from the batter terminal to this point is indicated

with red line so please scratch this area vary carefully and then make this jumpers as indicated in diagram attached with this post.it will help you to solve Aline battery problem in sony ericsson k310.

Nokia N95 On Off Power Button Print Damage Problem Ways Jumpers Solution

if you are facing power problem in nokia n95 and have on off button problem in nokia n95.if power button is not working and charging properly then it means that here is a power problem due to only power button.

this diagram can help you in case if power on off button print is damage also.make this jumper as shown in diagram in red line color.and also check this ic which is inline with red line.

nokia x2-00 network problem solution

If you are facing low signals and no network problem in Nokia X2-00 it can be solve with a few easy steps that I going to write in this post. The bellow diagram have two steps that can solve network problem in nokia x2-00.
nokia x2-00 network problem solution
In first steps check the mother board if it have some rsust carbon or water damages. And may it have some missing or burn parts. So clean the mother board with electronics clean and apply heat to make it dry.
Check the Antina points and apply jumper as shown in first step of the above diagram.Re sold the main network Aplifier and reflow it as given in step 2 of the above diagram to solve newtwork and signals problem of Nokia X2-00

Nokia x2 hand free open problem jumpers solution

Nokia x2 handfree problem, hand free singe, hand free open, can be solve with this diagram that I am going to post in this post bellow. look at the diagram and these two ic and there near about area if you find some rust water damage or carbon here you can clean the board and dry Nokia x2.
Nokia x2 hand free open problem jumpers solution

Once it is cleaned resold these parts and if problem is not solve remove first ic and make jumpers as defined in diagram and replace 2nd part to solve hand free problem in Nokia x2

All About Mobiles Headline Animator

Related Posts Plugin for WordPress, Blogger...
FeedReader button