All About Mobiles

http://www.infolinks.com/join-us?aid=2084565

Walton Primo H1 Firmware Flash File FreeDownload

WALTON Primo H1 Software update (AP+BP) Guide


Driver installation

1) Install AP part driver
Power off handset, press “Power key + Voice Up key” until the screen shows green, plug in usb cable, PC will remind you of installing new hardware. Unzip “ Driver”, select adb driver file, install AP driver.

Path: Right click on My computer>Manage>Device manager>Android(Yellow notification)>Update driver software>browse path> select adb folder >Continue anyway>finish
When you install AP driver successfully, you will find “Fastboot interface” in device manager. As below


2) Install BP part driver

(i) Power off  handset, press “Power key + Voice down key” until the screen shows QPST mode, plug in 5Pin USB cable, Unzip “Driver”, select HK11-VB717-27_1.0.56 driver file, install BP driver.
Path: Right click on My computer>Manage>Device manager>Tiyanyu HS-USB Driver (Yellow notification)>Update driver software>browse path> HK11-VB717-27_1.0.56\Win32\x86\free >Continue anyway>finish.
(ii) When your BP driver is installed successfully, you will find Qualcomm HS-USB ports in device manager. As below:





Software Upgrading:

1.Download BP
Open EMMC_Download_V1.2.4  tool, set your handset into BP mode (Power key+ Voice down key) and connect your phone with USB cable.


1. Click set path>Browse folder>Select 593517_8734_WCDMA_V0038
2. Click Download




2.AP Download:

Open Qualfast 2.0.5  tool, set your handset into AP mode (Power key+ Voice up key) and connect your phone with USB cable.


1. Click Set path>Browse folder>Select 593517_8734_V006021
2. Click Ok for Start download.
3.   Run *#8929#

4.Built-in apps installing

a)   Put update_walton_H1.zip  into root directory of SD card .
b)   Run *#8348#

Note: If your antivirus detects Flash Tool as virus, disable your antivirus till software is finish.

Please Login to the forum to see the Mediafire link
Download

Walton Primo D1 Software & Tools Firmware Flash File

1. install driver.

2.Open Flash Tool



3.Open  Download Agent and select MTK_AllinOne_DA



4. Open scatter_loading and select SW---> WBWS212WA_0301_T5067 MT6577_Android_scatter_emmc



5. Click  Firmware-> Upgrade and connect USB with mobile (without battery)
6. Insert Battery then start downloading ..
7.When it shows Firmware Upgrade  with green colour, the installation is completed.



Download

Walton Primo C1 Software & Tools

Software Flashing Instructions for Primo-C1

1.   Double click Setup.exe to install the driver.



2.   Double click ResearchDownload.exe and open the flashing tool.



3.   Click the first button, select the correct .pac file and confirm.



4.   Click the third button to get ready to start.




5.   Connect the handset to PC with USB data cable, Long press volume down key and insert the battery. Now it starts to install the software.

6.   When it shows Passed in green, the installation is completed.

Download

Walton Primo G2 Firmware Upgrade

 WALTON Primo G2 Software update (AP+BP) Guide


Driver installation

1) Install AP part driver
Power off handset, press “Power key + Voice Up key” until the screen shows green, plug in usb cable, PC will remind you of installing new hardware. Unzip “ Driver”, select adb driver file, install AP driver.

Path: Right click on My computer>Manage>Device manager>Android(Yellow notification)>Update driver software>browse path> select adb folder >Continue anyway>finish
When you install AP driver successfully, you will find “Fastboot interface” in device manager. As below


2) Install BP part driver

(i) Power off  handset, press “Power key + Voice Down key” until the screen shows QPST mode, plug in 5Pin USB cable, Unzip “Driver”, select HK11-VB717-27_1.0.56 driver file, install BP driver.
Path: Right click on My computer>Manage>Device manager>Tiyanyu HS-USB Driver (Yellow notification)>Update driver software>browse path> HK11-VB717-27_1.0.56\Win32\x86\free >Continue anyway>finish.
(ii) When your BP driver is installed successfully, you will find Qualcomm HS-USB ports in device manager. As below:


Software Upgrading:

1.Download BP
Open Primo Download V1.2.3 tool, set your handset into BP mode (Power key+ Voice down key) and connect your phone with USB cable.




1. Click set path>Browse folder>Select 592522_8550_WCDMA_V000001
2. Click Download All


2.AP Download:

Open Primo Flasher V1.0 tool, set your handset into AP mode (Power key+ Voice up key) and connect your phone with USB cable.




1. Click Set path>Browse folder>Select 592522_8550_V001006
2. Click Ok for Start download.

Note: If your antivirus detects Primo Flash Tool as virus, disable your antivirus till software is finish.

Walton Primo F1 New Official Firmware Flash File & Video Tutorial

New official firmware for primo F1 (Build Number: A51B_WALTON_V0_0_9) [solved: black screen, memory & others bugs]

D/L text file from attachment  "Primo F1 FW v. 0_0_9" you will get download link

Guide:

1. Install USB cable drive software. (From "Driver" folder )
2. Open Flash Tools MultiportDownload.exe (From "Download Tools" folder)
3. Select smart phone and press ok.
4. Click "Select file" for select scatter file
5. Select scatter file (MT6575_Android_scatter_emmc) from software folder (Under "WALTON_Primo_F1_Firmware" folder)
6. Download file load successfully will show. click "ok" button.
7. Press "Start all"

8. Under POWER OFF mode press & hold Volume up and down key together, then put USB cable in to Handset charging port
(with battery). Software process will be start within few second.

9. Wait till complete software update process.


** NOTES... If auto driver installation failed (step 1) then install manually after ( step 8 ) connect USB 
Cable as soon as possible.) 
 
 
 

Walton Primo G1 Jelly Bean v.4.1.2 for primo G1 [Update] Firmware Flash File

1. Install driver.
2. Open Flash Tool



3. Open Download Agent and select MTK_AllinOne_DA



4. Open scatter_loading and select scatter file
SW---> WBW6803WA_0410_T8142 MT6577_Android_scatter_emmc



5. Click Firmware->Upgrade and connect USB cable with mobile without battery

6. Insert Battery then start downloading..

7. When it shows Firmware Upgrade , then installation is completed.



After Firmware Upgrade give Reset to Factory Setting

Firmware Download

Walton Primo R1 Custom CWM Recovery & Firmware Flash File

CWM Recovery Tutorial For Primo R1★
Download the recovery file from here http://
www.mediafire.com/?zsodf48r3g3661o
Rename this file to recovery.img
Transfer the renamed file to your phone’s SD card.
Download MobileUncle MTK tools from Google
Play on your Walton Primo R1 and install it.
Open the MTK tools app.
Select the Recovery Update option, now choose
the recovery.img that you have just transferred to
your Primo R1
The app will flash CWM recovery on your Primo R1
now.
Your phone will reboot in CWM recovery after which
you can do anything you like.(Well, almost). You can
boot into CWM recovery anytime by turning your
phone OFF, press and hold volume down + volume
up + power buttons until the screen turns on. After
which you could take a nandroid backup (which is
optional) and reboot your device.
Note:Do Ur Own Risk.
Flash file

Walton Primo Upgrading Primo OS ( From Gingerbread 2.3 to ICS 4.0 )Firmware Flash File

If you want to Upgrade Your Primo from 2.3 to 4.0 (Ice cream sandwitch), you can follow the link & download the tools.It's very easy.


Download
Here you'll find
1. Software
2. Flash tools
3. Driver
4. Upgrading manual

Samsung Info- I9100G Base band Unknown & IMEI Empty Done By Flashing

Samsung Info- I9100G Base band Unknown & IMEI Empty Done By Flashing

Hello
Every One

Today's I Get I9100G Base band Unknown & IMEI Empty

Then I Flash With Multiply Package After Flash Its Hang On Samsung Logo

Then I Flash With Latest Firmware
Now Phone Working

Base Band & IMEI Both OK After Flash

So If Any One Next Time Get Same Problem
Before Repair You Can Try This Way

Note - I Share This Info , Maybe Its Help You Some Time

All About Mobiles Headline Animator

Related Posts Plugin for WordPress, Blogger...
FeedReader button