Here is a tutorial for the instaler unofficial firmware 1.018.01D Android Market on acer betouch e110
Install the firmware is pretty simple - it Requires no special skills! The flash looks like a normal installation of software on your PC. The flash looks like a normal installation of software is your PC.
About the firmware:
- Addition of the Android Market - Addition Of The Android Market
- Root access (you can have full access to the whole system) - Root access (You Can Have Full Access To The Entire System)
- Additional Programs: GMaps, super-user, Market, Gmail, Contacts - Additional Programs: GMaps, super-user, Market, Gmail, Contacts
First, download the following two files: First, Download the two files:
- The RUT (software to update the firmware): RUT_V1.2.1.exe
-
Firmware: Acer_E110_1.018.01D_EMEA_with_market_v1.zip How do I install the new firmware: How do I Install the new firmware:
WARNING: Your fully-charged battery Must Be Before you start handling.
1 - Download and install - RUT_V1.2.1.exe 1 - Download and install - RUT_V1.2.1.exe
2 - Launch RUT (there will be a shortcut RUT): 2 - Launch RUT (There Will Be a shortcut RUT):
3 - Select the downloaded firmware (link above), after having unpacked the archive into a folder: 3 - Select The Downloaded firmware (link above), unpacked after HAVING Into the Archive folder has:
4 - Now you need to connect your smartphone to the PC to update the firmware: 4 - Now You Need to connect your smartphone to PC To The Update the firmware:
a. a. disconnect the USB cable and remove the battery disconnect the USB cable and remove the Battery
b. b. Reposition Reposition Battery The Battery
c. c. Click Next in the window, click Next On The RUT RUT window
d. d. When the message "USB Device Polling" appears, press the talk key and key-pad left circle, and keeping them pressed, connect the USB cable.
When The message "USB Device Polling" appearance, press the talk key and key-pad left circle, and Keeping Them pressed, connect the USB cable. After connecting the cable you can release the button, wait 1-2 seconds. After Connecting the cable You Can Release the button, wait 1-2 seconds. The flash should start. The flash should "start.
4 - Maintenant, vous devez connecter votre smartphone au PC afin de mettre à jour la firmware :
4 - Now you need to connect your smartphone to the PC to update the firmware: 
5 - If you installed the new firmware has been completed successfully, the following screen appears:
NOTE:USE WINDOWS XP FOR THIS FLASH.DIDINT WORK FOR ME ON WINDOWS 7
IF YOU GET A DEVICE NOT CONFIGURED ERROR " program writes in red "Dowload finished, Result = Device not configured (0x4000)."
Try installing the drivers from Acer beTouch E120, from acer support
No comments:
Post a Comment